Refrigerated Warehouse: from Design to Commissioning

COLD ROOMS FROM DESIGNING AND OPERATIONS

In this article, we will try to touch upon the practical issues of designing and building cold constructions, which we hope will be useful to readers when planning a refrigeratory warehouse and communicating with your sale consultants.

One of the most common methods of building warehouses at present time is currently the erection of buildings with the use of lightweight metal structures and thermal insulation with  PUR or PIR panels. Their main advantages are short installation times, low capital and operating costs in comparison with the building from among the traditional materials.

Typically, the building of a cold warehouse includes the following stages:

1. Technical Assignment:

  • Formulating the needs of the client and drawing up a design specification on their basis

2. Engineering:

  • Carrying out of pre-project researches;
  • Design of the project;
  • Approval of the project;

3. Building:

  • Foundation erection;
  • Enclosing structures installation;
  • Roofing
  • Making floor.

4. Engineering Communications and Climatic Equipment: 

  • Utility lines installation;
  • Installation and pre-commissioning activities of the refrigeration equipment.
5. Commissioning
 
  • Starting operation in the cold room.

Technical Assignment

When contacting the company with a request for the construction of a refrigeratory warehouse, the customer cannot always present a clearly worded technical assignment. In this, the specialists, to whom he addressed, must help him. To obtain the technical decision and calculate the cost of construction it will be needed:

  • Type of product;
  • Storage volume and product turnover;
  • Construction region.

From these data, the specialists can calculate the required volume of the refrigeratory warehouse and its dimensions, offer the planning solutions and the scheme of loading and unloading operations, and select the refrigerating equipment. It is desirable to attract for solving these issues the internal service of your company: the logistics department, technologists, or engineers, etc., in order to take into account the various nuances of exploitation in advance. In calculations, it is necessary to take into account the density of stacking, cargo height, space above stacks, spacing from walls, cargo passages. To do this, the special regulations are applying, developed by the leading experts in such field, and more than once tested in practice. Neglecting them can lead to unjustified expenses for construction and installation, or, due to the narrowing of the freight front, to a decrease in freight turnover. Based on the terms of reference, your supplier can offer the constructive solutions and calculate the cost of construction.

Project

The project − a necessary component of any building, let alone a freestanding building. It is particularly noted that this is − a project that is made in accordance with your country current building standards, and simple the architectural and planning solutions drawn in the AutoCAD program are not enough. The last is useful for analyzing and approving the conceptual design of the building, but this is not enough to build it. So, for the safe use of the Refrigeratory warehouse, in the design, it takes into account the existing plot geology, the building area seismicity, wind and snow load, fire safety standards and much more, which is actually laid down in building codes and regulations. The disparity of finished object with building norms and rules or the requirements of fire inspection may cause additional costs for matching and reconstruction, or lead to the forced demolition of a building. For project implementation and pre-design works a topographic plan of the building area is necessary, a report on geological conditions, etc. As well as the permission of local administration for the building of the facility, without which it is formally impossible to begin the designing, let alone the building itself. The ready project is approved on the state instances, local administration and the customer himself. The further work, from the materials supply to the installation works, is carried out strictly on the project.

Building

The foundation type is chosen based on functional and economic requirements and constraints. In refrigeratory warehouses, the floor level, as a rule, is at the level of 1.2m from the ground for easy loading and unloading of products from cars and railway wagons. Simultaneously, it solves the problem of freezing through, due to the creating vented under-floor space, the absence of this requires the floor heating or performing the floor having a system of special channels, which leads to additional costs. When storing products, it must perform the specific requirements to the floor structure, so it must perform the functions of heat and waterproofing, withstand the planned load per unit area and the low temperatures influence, and also comply with sanitary standards in the refrigeratory warehouses. To solve all these problems, a multi-layered “pie” is making, the composition of which is also indicated in the building project.

For example, the top layer of the floor is frost-resistant and non-dusty. And thanks to the special additives it is laid color in accordance with the functional features of the operation and the wishes of the customer. On the perimeter of the walls, the bump-side board is made, which protects the walls from damage during loading and unloading operations. The metal structures that make up the building frame must be protected from corrosion. The greatest value in the building of refrigerated warehouses has thermal insulation since it determines the refrigerator operating properties.

The thermal insulation is the subject of a number of rather stringent requirements:

  • Low thermal conductivity;
  • Low water absorption;
  • Heat resistance;
  • Low flammability;
  • Should not attract rodents and have sufficient mechanical strength.

The three-layer panels, filled with polyurethane foam, meet the above requirements most of all. External metal sheathing protects against moisture and gives the panel the necessary rigidity. And the foamed polyurethane has a better coefficient thermal conductivity compared with the currently used thermal insulation materials. The price per square meter of panels is often the first and last thing that the customer is interested in when choosing a supplier. Although, the panels performance characteristics from the different manufacturers may differ greatly. In particular, the polyurethane foam coefficient of thermal conductivity depends on the quality of raw materials, equipment, compliance with the production technology and is within the range of 0.019-0.022W/m2*K. What thickness of the panel should be used depends on this indicator. It is also necessary to pay attention to the panel construction, it must have a special profile along the butts, reducing a heat inflow through the joints and safely securing them. Using of locks allows refusing application of various additional elements and hermetic. The refrigeratory warehouse doors and gates are subjected to active mechanical loading during operation. So, unjustified savings in quality can lead to the frequent repairs and disrupt the work of the warehouse.

Commissioning

It may take several days or weeks to reach the standard refrigerator warehouse operation mode. This is required to set the necessary temperature in the cold-storage chamber and to debugging the equipment operation. In particular, a considerable time is necessary for freezing the concrete floor in low-temperature warehouses.

Fill the Form!

     Write your needs and fill the form to contact us. Then get your cold room!